If you want to save money on your curtains, consider building your own curtain rods. You can use a variety of materials to create the rods you need, including tree branches, metallic electrical conduit, and cabinet knobs. These materials will cost less than $20 per room. Here are a few ideas to get you started:
Repurpose cabinet knobs as curtain rods
Cabinet knobs can be reused to make decorative curtain rod finials. You can use cabinet knobs on small diameter curtain rods, or door knobs on larger ones. The decorative look of curtain rods can be greatly enhanced by using the right type of finials. Moreover, you can save a lot of money by making your own finials.
A wooden dowel can also be used for this purpose. You can buy a dowel from a hardware store and cut it to the right size. Then, drill a hole in the center of the stub to fit the screw of the knob.
Repurpose tree branches as curtain rods
A beautiful way to make a curtain rod is to repurpose tree branches. Branches can be found around your property and are perfect for this project. You can paint them, stain them, and screw them into place to hang curtains. You can also add a protective coating to the tree branch to prevent damage. Once dried, you can screw the branch into place.
If you have access to tree branches, you can also cut them down to the length and curvature you want. You can use a hand saw or a bow saw to cut the branches. Remember to dry them thoroughly before removing bark.
Repurpose metallic electrical conduit as curtain rods
Conduit can be found in most hardware stores for a very low price, and can be easily repurposed as curtain rods. It can be cut to size and spray painted in any color. Depending on the length you need, you may need to cut the ends of the conduit to length. Once you have your conduit cut to length, you can begin attaching your finials.
You can find electrical conduit in lengths of up to 10 feet, and it can be bought in even longer lengths. It will fit standard curtain rod brackets and will support both heavy and lightweight fabrics. A single length of EMT costs under $10 at the hardware store. If you’re planning on using blackout curtains, an electrical conduit curtain rod is a perfect choice.
Build your own curtain rods for less than $20 per room
Building your own curtain rods is a fun and rewarding home improvement project that doesn’t break the bank. You can use old pipes and spray paint to customize them. This DIY curtain rod idea is perfect for kids’ rooms and craft rooms. You’ll need three yardsticks and a couple of hooks to build the rod. The best part is that the materials used for this project are cheap and easily available at home.
Alternatively, you can use an old fence or coatrack for a curtain rod. Paint the branches to match the decor and attach them to the wall. You can also plant some branches near the window and let them hang over the window. Twigs and branches can also be used to make brackets for curtain rods.
