Whether you need to remove coaxial cable, 16- to 26-gauge stranded wires, or sheathing from cords, you’ll need a wire stripper. Here are tips to help you find the right one for your job.
Remove sheathing from cords
Using a wire stripper to remove sheathing from cords is a simple procedure. However, it requires a lot of concentration to pull the sheathing off the wires without breaking them. A steady hand is also a must. If you are unsure of the procedure, practice before starting your next home improvement project.
The first step in removing sheathing from cords is to find the correct gauge. This can be done by reading the label on the wire. Once you have determined the appropriate gauge, you can choose the right tool for the job. A wire stripper is one of the best tools for this job. The tool has jaws that close around the wire and slicing blades that remove the insulation.
Remove coaxial cable
Using a wire stripper to remove coaxial cable is a simple process. But be careful and take care not to overdo it. This can result in wires that are nicked and broken, which will reduce the performance of the cable.
Before starting, make sure that the cable has a solid copper conductor. If it is not, it may break off. It is also important to check for damage to the center conductor. If it is damaged, it may need to be replaced. You can use a regular utility knife to remove the center conductor. However, you should be careful because it is easy to stab your finger in the metal shielding wires.
Find the right wire stripper for your job
Using the right tool for the job is vital for any wiring project. The right tool will save you time and prevent injury. You can find a number of wire strippers for sale at a hardware store or online. Before you buy a wire stripper, make sure you check the specs and find the right one for your job.
Wire strippers can be used to strip wire, cut it, or even bend it. Most of them feature slots or notches to accommodate different sizes of wire. In addition, some strippers come with other cutting tools, like a crimper.
Remove insulation from 16- to 26-gauge stranded wires
Using a wire wrap tool is one way to remove insulation from 16- to 26-gauge stranded wires. The tool essentially wraps around the wire and then cuts the insulation at an angle. You can also remove the insulation from a cable with a wire stripper.
A wire wrap tool is useful for removing insulation from a cable and can help you to reduce costs. Many wire wrap tools will have a notch to fit the wire size. It is important that you align the wire gauge with the notch.
The wire wrap tool can also help you to crimp terminals. This is especially important with power cables and switches.
