Depending on the type of filter you have, you may be wondering how to backwash the filter. Some types of filters use sand to catch debris while others use diatomaceous earth as a fine grade filtration particle. To backwash a filter, you should first turn off the pool pump and turn the valve handle into the backwash position.
OC-1
OC-1 backwash pool filter is designed to remove pollutant particles from the pool. This filter is superior to traditional sand filters and reduces chemicals and water costs. It is recyclable and is suitable for all installations. The OC-1 filter is tested by independent institutions, such as the IFTS Institute and Cranfield University.
The OC-1 filter is made of extruded high density polyethylene and calcium carbonate. This media is capable of trapping debris at a 20-fold higher rate than sand. It has passed all IFTS tests and can reduce filter media replacement costs. Its long-lasting nature and high efficiency make it a popular choice.
The OC-1 media is a superior filter because it can remove debris up to 20 times more particles than sand and glass. Its high surface area can remove particles down to one micron without flocculation, reducing pressure in the system. Moreover, the OC-1 filter can be installed in existing filters or easily converted to an existing sand filter.
Glass
Glass pool filters use glass media to clean the water in your swimming pool. This non-porous, ionically charged media kills bacteria and organic material, resulting in cleaner water. This type of filter requires minimal ongoing maintenance and is considered a sustainable option. It also offers many benefits, including increased clarity.
The glass media also ripens more quickly than sand, so it requires less backwashing. However, it is important to remember to backwash it as frequently as a sand filter. This way, you won’t have to worry about damaging the glass. In addition, glass media is much less expensive to replace than sand filters.
First, you need to turn off your pool equipment. Next, clamp your backwash hose to the water outlet. You must also set the filter value to BACKWASH. Once you have done this, lock the handle and wait until the water runs clear.
Sand
Backwashing a pool filter is an essential part of maintaining a well-maintained pool. This process revers the flow of water through the filter, sending dirt and debris out the waste house. This should be done at least twice a year. A backwash is also necessary if there are problems with your filter.
A backwash should be conducted for about two minutes for a sand filter. After this, the water should be completely clear. You can check the water’s clarity by observing the sight glass on the top of the filter. If you backwash too long, it can cause a number of problems. It can also reduce the lifespan of the filter and reduce its filtration quality.
Before backwashing, make sure that the backwash hose is positioned near the backwash port and is attached to it with a hose clamp. Often, a glass eye will be located near the port, so you can watch the water backwash.
