Performing a backwash is a necessary maintenance procedure for all pools. It’s an important way to remove gunk and other waste materials that build up in your pool’s filter. You can use the backwashing setting to clean the filter without draining the water. First, shut off the power to your pool system. Then, turn the Multi-Port Valve Handle to the ‘Backwash’ setting. Switch on the valve to start cleaning the filter.
Dispose of backwash water in a storm drain or sewer
Swimming pool owners have to dispose of the water they discharge into storm drains or sewers properly. If backwash water is not disposed of properly, it may harm aquatic life and flood neighboring properties. In addition, improper disposal can violate the Fairfax County Code’s Stormwater Management Ordinance. Backwash water is required to be chlorine and bromine-free and have a pH level acceptable for public disposal. In small amounts, backwash water can be discharged into the public sewer. However, if the pool is made of salt water, it cannot be discharged to a storm drain or sewer.
Clears dirt and gunk out of your pool’s filter
If you’re looking for ways to clean your pool, there are some easy solutions that you can use to keep your water clean. One of the easiest ways to do this is by regularly brushing your pool. This will help to dislodge any dirt that is visible on the walls and floor. You can also use an outdoor shower to rinse off after swimming. Cleaning the filter is essential to keeping your pool water clean and clear of contaminants.
Vinegar is another inexpensive way to clean your pool’s filter. Its acidic nature kills algae and bacteria and breaks down calcium deposits. It’s also safer than muriatic acid, which can cause serious chemical burns and can even damage your lungs. White distilled vinegar is also cheaper than most pool filter cleaning products. It’s also a great option to clean your filter yourself.
Know when to backwash a pool
It is important to know when to backwash a swimming pool. The process will release large amounts of water through the filter system. However, the water will not be able to be reused in the pool. It should not be used for landscape watering or for animals and plants to drink. Moreover, the water can pose a health risk to local wildlife. So, it is important to check with your local water authority for guidelines.
Before backwashing a pool, check the filter pressure. Write down the clean filter pressure. The pressure will increase over time as sediment builds up on the filter. As a result, the water will work harder to pass through the filter. When this happens, the filter pressure will be six to eight psi higher than it was when it was clean. If the pressure is above the clean level, you should consider backwashing your pool.
